How to turn a closet into a bathroom? Converting a closet into a bathroom can significantly increase living space. A small powder room off the kitchen, for example, can be useful for family members entering through a back door garage area. A walk-in closet may be less important than having another full bath in an upstairs area.
How to turn a closet into a bathroom?
A closet-to-bathroom conversion will most likely cost several thousands of dollars, but the new bath may increase the home’s market value because future potential buyers will see the converted closet space as an added bonus. Keep in mind that the closet must be large enough to accommodate all of the bathroom fixture clearances required by code, so do some research before you begin.
For the homeowner who wants to improve his living space, converting closets into further functional bathrooms makes complete sense. For many families, having more bathrooms is preferable to having too many closets.
While converting a closet into a bathroom can easily cost thousands of dollars, the ability to increase a property’s resale value far outweighs any cost concerns.
Step by Step Guide to turn a closet into a bathroom
Converting closets into fully functioning bathrooms is not for the inexperienced do-it-yourselfer. From closet preparation to finishing touches, there are numerous complicated steps and special tools and materials required to complete the project.
However, if you want to embark on a worthwhile project that the entire family will appreciate, nothing beats converting a closet into an elegant as well as a functional bathroom.
So, how does one go about converting a closet into a bathroom? Let us investigate. The following steps are involved in the procedure.
Step #1: Measure Closet Space
Measure the entire closet space as well as the surrounding floor space in the area where you intend to redecorate a closet to a bath. If necessary, probably expand closet walls outward into a bedroom to make the new bathroom larger.
On graph paper, draw the closet area as well as the living space adjacent to it. Examine the perimeter walls to see if they are load-bearing. Plan the total bathroom space which will be included so that any additional perimeter walls can be framed with 2-by-4-inch boards.
Step #2: Get Building Permits
Before applying for a building permit, consider the challenges you may face and devise code-compliant solutions. Determine whether it will be difficult to route electrical wiring or plumbing to the new bathroom space. If this is the case, one option is to go into the attic and look for a feasible way to direct new water lines or wiring into the bath you want to build.
The project may necessitate running water and electrical lines over long distances, which could be time-consuming. Once you’ve obtained your permit. As you plan and complete each stage of your project, you’ll still need to refer to local building codes as well as restrictions regarding bath construction.
Step #3: Frame the Space
Replace the framing and define the doors and windows. Install a window or skylight in the space to bring light into the new bathroom, for example. If the former closet has no access to exterior walls, construct a sky shaft capped by a skylight. Enclose a wide wall where closet doors once stood with boards. To create a unified look, consider hanging a bathroom door that matches both these interior doors in nearby rooms or hallways.
Step #4: Run Plumbing and Electrical
Before putting up new walls, run plumbing and electrical wiring. Ascertain that the room’s toilet drain, water pipes, and electrical requirements are in place. Install new drywall and paint the room, and make sure there is adequate insulation in the attic over the former closet. Before connecting light fixtures, install new main fixtures such as a shower and sink. Seat the toilet after the flooring has been installed. Toilets designed for small spaces can be found at Amazon, Home Depot, and Wayfair.
Step #5: Complete Flooring and Add Shelving
Finish the flooring by caulking all appropriate areas and laying a tile floor. After the finished flooring has been installed, add baseboard material. After the grout has dried completely, place the toilet on top of the tile with a wax seal. Add shelving as well as artwork to the newly converted bathroom closet.
Families who convert a closet into a bathroom will save money on building a new one. Families can save thousands of dollars by converting unused or rarely used closets into functional living spaces that the entire family can enjoy.
While normal house owners can finish the project, it would be much more efficient and effective if a professional contractor handled the transformation. It may be more expensive, but the results will be more stunning than almost any ordinary person could ever achieve.