How to Fix Magsafe Charger not Working on iPhone 13?

How to Fix Magsafe Charger not Working on iPhone 13

How to Fix Magsafe Charger not Working on iPhone 13? You left your iPhone on the MagSafe charger overnight, yet your battery life decreased. Whereas the MagSafe charger is claimed to increase wireless charging on iPhones, that’s not always the case. In this article, I’ll describe what to do because your MagSafe charger isn’t charging your iPhone

Magsafe Charger not Working iPhone 13

Some consumers have reported issues charging their iPhone 13 Pro with MagSafe chargers. Users experiencing these issues say that, despite being attached to the MagSafe charger via the MagSafe magnet, their iPhone 13 Pro is not charging. This post will provide some troubleshooting tips for dealing with the MagSafe charger not working on iPhone 13 Pro issue.

What is MagSafe?

MagSafe is an Apple magnetic technology that is included in the interior design of the iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro Max. MagSafe, which was originally designed as a safety feature for MacBook charging cords, was introduced into iPhone 13 models to provide a new ecosystem of accessories for easier attachment and faster wireless charging.

How does MagSafe work?

MagSafe is a network of magnets located around the internal charging coil of the iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro Max that detects other MagSafe compatible products and snaps easily and securely into place. MagSafe would only attach to other approved MagSafe accessories, so there’s no need to worry about the other magnetic interfering or being stuck to your phone.

Does The MagSafe Charger Charge All iPhones?

MagSafe is available on all iPhone 13 and 12 models. However, these are not the only iPhones that can be charged with the MagSafe charger. If you use a MagSafe charger to charge an iPhone 8 or later, it will function the same as any Qi-enabled wireless charger. It will not, however, snap to the centre like it would on an iPhone with MagSafe.

It’s worth mentioning that charging an older iPhone model with a MagSafe charger may result in a slower charge than charging it with a Lightning cord. Furthermore, MagSafe chargers are incompatible with iPhones 7 and before.

How to Fix Magsafe Charger not Working on iPhone 13?

When you have the necessary adaptor and are confident that your iPhone is compatible with the MagSafe charger, you can begin troubleshooting. The instructions below will show you how to determine whether the problem is caused by your iPhone or your MagSafe charger, as well as how to permanently resolve it. If your iPhone 13 Pro unexpectedly stops charging using MagSafe, follow the instructions below to resolve the issue:

Method 1: Connect Your MagSafe Charger to a Power Source

MagSafe chargers are not totally wireless because you must still connect them to electricity. Make careful to unplug your iPhone from the charger before plugging in your MagSafe charger. Then, insert the USB-C power line from your MagSafe charger into an adaptor. Finally, connect the adapter to a power outlet or power strip.

Place your iPhone directly on the centre of the MagSafe pad once your MagSafe charger is securely plugged in. It should click into place if you have an iPhone 12 or 13. You’ll have to manually align these devices with any previous iPhone model. Make sure the MagSafe charger is facing up, as it will not operate if it is turned upside down.

Method 2: Your MagSafe Charger Should Be Cleaned

When too much gunk accumulates on a MagSafe charger, it might prevent iPhones from charging normally. Examine your MagSafe charger to see if there is any dust or other dirt on it.

Unplug your MagSafe charger from its power source if you find anything. Then, using a moist cloth, clean the surface of your MagSafe charger. Allow it to dry for a few minutes after cleaning it. Try an anti-static brush or a new toothbrush for tougher debris.

Clean MagSafe Charger

Finally, reconnect your MagSafe charger and attempt charging your iPhone again.

Method 3: Restart Your iPhone 13 to Fix Magsafe Charger

It seems to be possible that your MagSafe charger isn’t working due to a software glitch on your iPhone. Restarting your iPhone might resolve a variety of minor software issues.

To switch off your iPhone X or later, press and hold the side button as well as the volume button. After a few seconds, the screen will display a slider labelled Slide To Power Off. Your gadget will shut off if you slide the red power icon from left to right.

Wait a few seconds, then press and hold the side button to restart your iPhone. When the Apple logo appears on the screen, release the side button and your iPhone will restart.

Press and hold the power button on an iPhone 8 or older until the Slide To Power Off screen appears. Then, from left to right, swipe the power icon to shut off your device. After a few seconds, hit and hold the power button once again to restart your iPhone.

Method 4: Take your iPhone out of its case

Some iPhone covers are so thick that wireless charging is impossible. Whether or whether your iPhone has MagSafe, your protective case could be the cause of your iPhone’s inability to charge.

This step is especially crucial if you use your iPhone cover to keep things like credit cards, as some magnetic materials can destroy the MagSafe pad. Remove your iPhone from its case and place it immediately on your MagSafe charger.

Remove iPhone 13 Case

If you have an iPhone 13, iPhone 12 or later, you may believe that the MagSafe charger should operate with or without a case. Not all iPhone cases, however, are MagSafe cases. Consider acquiring a MagSafe iPhone Case if you want to avoid having to remove your case every time you charge your iPhone.

Method 5: Update iPhone to Fix Magsafe Charger

If you’re using an out-of-date iOS, this may be why your MagSafe charger isn’t working. Install the most recent software update, then try charging your iPhone again with the MagSafe charger.

Open Settings on your iPhone to upgrade iOS immediately. Then, go to Settings -> General -> Software Update. If a new software update is available, select Install Now.

Method 6: Hard Reset iPhone

When switching your iPhone off and on again didn’t work, a hard reset might. A hard reset, also known as a force restart, causes your iPhone to stop all running tasks, then turn off and back on.

When hard reset an iPhone with Face ID, press and release the volume up and volume down buttons simultaneously. Finally, hold down the side button until the iPhone screen blacks out and the Apple logo appears.

To put an iPhone 7 to sleep, press and hold the Sleep / Wake button as well as the volume down button at the same time. When the screen turns dark and you see the Apple logo, release both buttons and your iPhone will restart.

If you do have an iPhone 6 or older, press and hold the Sleep / Wake and Home buttons at the same time. Hold both buttons down until your iPhone screen goes black and the Apple logo appears. Your iPhone should then switch back on by itself.

Method 7: Apple Support to Fix Magsafe Charger

If none of our other solutions has helped, the most likely cause of the problem is hardware damage to your iPhone or MagSafe charger. If this is the case, we recommend bringing your devices to Apple to determine your repair options.

Do you live near an Apple Store? Schedule an appointment with the Genius Bar and bring your iPhone and MagSafe charger in for a technician to inspect. They will diagnose the problem for free and provide you with an estimate for the cost of repair. They might even be able to replace the faulty component on the spot!

Can I Use An iPhone’s Power Adapter With My MagSafe Charger?

Apple’s MagSafe charger does not include a power adapter. Regrettably, not all USB power adapters are also compatible with the MagSafe charger.

The MagSafe charger will not operate with a conventional iPhone power adapter. There are several causes for this. The first difference is that the MagSafe charger cable requires a USB-C port, whereas the usual iPhone charging brick is USB-A. Even if you buy a USB-A to USB-C adaptor, the MagSafe charger will still not charge your iPhone.

This is due to the fact that an iPhone adapter is insufficiently powerful. For your MagSafe charger, Apple suggests using a 20W USB-C power adapter. However, any USB-C converter with at least 12W of power will work with the MagSafe charger, however, charging time may be longer. You can also use the power adapter that came with your 8th Generation iPad or 4th Generation iPad Air to power your MagSafe charger if you have an 8th Generation iPad or 4th Generation iPad Air.


Although MagSafe for iPhones is still a fairly new concept, charging issues are to be expected. Perhaps, you’re now on your way to successfully charging your iPhone with your MagSafe charger. If you have any further queries, please leave them in the comments.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top