Home How To/Guides How to Bypass the Garage Door Sensor?

How to Bypass the Garage Door Sensor?

by Ahsan MuGhaL
4 minutes read
How to Bypass the Garage Door Sensor

How to Bypass the Garage Door Sensor? Garage door sensors are an excellent security feature, but what if you want to open the door without triggering the sensor? Perhaps your vehicle is too tall to fit under the sensor. Maybe you don’t want to go to the trouble of opening the garage door. Whatever the case may be, there is a solution to avoid those pesky sensors! We will show you how to circumvent garage door sensors in this blog post.

How do Garage Door Sensors Function?

The majority of garage door sensors are infrared sensors. They emit an infrared light beam that, when broken, activates the sensor. That is why you cannot simply place something in front of the sensor to block the light; the object must be large enough to totally block the entire beam.

Garage Door Sensor

Warning: Physically moving the photoeye sensors above the garage door to avoid them can result in serious harm or even death if the safety mechanism fails to function properly.

How to Bypass the Garage Door Sensor?

So, if you’re thinking about bypassing the sensors, there are a couple of options:

1. Make use of a Reflector

A reflecting surface can be used to reflect infrared light back onto the sensor. This will fool the sensor into thinking there is nothing blocking the light, allowing you to open your garage door.

2. Make Use of a Laser

A laser pointer can also be used to avoid garage door sensors. When you point the laser at the sensor, it will bounce off the surface and back into it. This will fool the sensor into thinking there is no obstacle, allowing you to open your garage door.

3. Make Use of a Piece of Tape

If you don’t have a reflector or a laser pointer, you can bypass the sensors with a piece of tape. If you place the tape over the sensor, it will reflect the light back onto it. This will fool the sensor into thinking there is no obstacle, allowing you to open your garage door.

Bypassing the sensors is a simple process that can be accomplished in a variety of ways. You can use a reflector or a laser pointer to reflect the light back onto the sensor. You can also use a piece of tape to circumvent the sensors. In either case, you will be able to open your garage door without difficulty.

4. Hold down the Garage Door Button

One of the simplest ways to bypass garage door sensors is to just push and hold the garage door button. This will disable the sensors and allow you to access your garage door. This strategy, however, will only work if the sensors are not damaged. This method will not work if the sensors are damaged.

5. Change to Manual Mode

Switching to manual operation is another approach to avoid the garage door sensors. This is accomplished by pulling the red cord connecting to the garage door. This will turn off the automated opener and allow you to operate your garage door manually. This method will also only work if the sensors are in good condition.

6. Sensor Alignment Hack

If you’re handy with tools, you might be able to hack the sensor alignment. This is a little more difficult, but it is doable. To begin, detach the sensors from the garage door opener. The sensors must then be realigned so that they are not pointed at each other. This can be accomplished by simply moving them up and down. You will be able to open your garage door without any problems after they are properly positioned. Contact a Professional.

Also Read: How to Fix Garage Door Cable

Tips for Avoiding Sensors

They’re all good, but sometimes the simplest option is to just call a garage door specialist. If you are experiencing problems with your garage door sensors, it is advised to contact a garage door provider.

They will be able to promptly diagnose and fix the problem for you. If you are not comfortable dealing with tools or do not have the time to fiddle with the sensors, this is usually the best solution.

Garage Door Sensor

Conclusion

There are several methods for bypassing garage door sensors. Which method you use will be determined by your skill level and the amount of time you have available. You can attempt tweaking the sensor alignment if you are handy with tools.

Also Read: How to Adjust Garage Door Sensors

You may also like

Leave a Comment