Remove Wall Between Kitchen and Living Room Before and After. The majority of people entertain and spent most of their time with their family in their living rooms and kitchens.
Remove Wall Between Kitchen and Living Room Before and After
Remove the wall between the kitchen and the living room before and after renovating an older home, and can be performed as part of a comprehensive kitchen makeover to capitalise on contemporary home building trends.
Fewer walls and wider, integrated sections are popular in modern homes because they make the space feel larger and enable individuals to entertain and spend time with their families. If you live in an older house, you can follow the trend of separating the kitchen and living room.
Step by Step Guide to Remove Wall Between Kitchen and Living Room
Begin by determining if the wall is load-bearing and developing a plan for supporting the house both during demolition and construction. Don’t forget about electrical, plumbing, and HVAC systems that may have to be relocated, which may add to the expense.
It is vital to obtain your estimates in order to ensure that the project’s cost does not exceed your budget. The last thing you want is a lien on your property.
1. Finding Supporting Structures
The structural support of a load-bearing wall must be maintained throughout construction and rebuilt with a beam once the project is finished.
Find a stud at least one foot from any doorway with a stud finder to locate a supporting wall. Remove a drywall piece from the top of the wall, centred over the stud. Whether there are two horizontal 2x4s on top of the stud, the wall is load-bearing. The lack of a top plate implies that the wall does not provide any support.
2. Example Remodel Plan
In this sample project, two walls are eliminated to radically modify the living room and kitchen space. A new column supports the existing beam and the new beam where the two walls previously met at a corner.
The removal of the two walls between both the kitchen and the living room gives extra space for a new continental counter or island, creating a sense of openness for uncomplicated entertaining. Guests can sit in the new area while you prepare dinner.
3. Electrical and Plumbing
Before dismantling, if possible, relocate switches to a different wall. When constructing a new island or counter, receptacles may be necessary.
Plumbing in the wall is more difficult to install. Water and vent pipes are easy to relocate, while drain pipes are more challenging. Unless you have extensive plumbing skills, employing a plumber to move pipes may be a good idea.
4. Temporary Support
Build a structural strength out of 4/4 lumber about a foot away from the supporting wall. Use a 24 for the bottom plate and a 44 for the top plate.
There will be a 44 at each end and one for every three feet of additional length — for example, a 9 wall will also have a 44 at each end and two inside the middle, three feet and six feet from one end. Construct this support system in place to ensure a tight fit.
5. Remove Wall Between Kitchen and Living Room
To avoid damaging adjoining walls and ceilings, use a utility knife to cut corners and along ceiling seams. Using a three-pound hammer, punch holes in the drywall in a horizontal line from one corner of the block to the other.
With both hands, pull the drywall off the wall, continuing until most, if not all, of the drywall, has been removed from both sides of the wall. Remove the studs at the underside with a reciprocating saw and remove them. Remove the top and bottom plates from the floor and ceiling, respectively.
6. Install Beam
Install the support beam if necessary. Although the building department rule requires it, most beams will be supported by 24 studs at each end.
If the beam is not snug against the joists or rafters it supports, the floor or roof will sag. Nail three 2x4s together for each end.
Install the beam supports on each end and have workers hold them against the rafters or joists. Before you begin construction, ensure that you have received approval from the building department for a beam.
7. Finishing Work
Cover the gaps in the drywall on the ceiling and walls with drywall if you erected a beam and support structure, or cover the gaps in the drywall on the ceiling and walls with drywall if you did not.
Tape the drywall and finish it with compound and sanding, as with any drywall installation. You can also add kitchen wall cabinets to your new kitchen to make it more appealing. To finish, prime, then paint the work – removing a wall between the living room and kitchen to make more space, done!
Why is the investment worthwhile?
If you’re planning a kitchen remodelling project, consider removing the wall between the kitchen and the living area before and after. Here are a few of the reasons for this.
- The open area will make your kitchen and dining room appear larger and more attractive.
- You will get more natural light and great ventilation if you build an open concept kitchen.
- You’ll have more time to spend with your family. Also, you’ll be able to host guests more easily because you’ll have easier access to the rest of your home.
- Most essential, many house buyers choose open-concept floor plans. Your new kitchen will almost probably command a higher asking price.